KINGSTON 16GB 6000MT/S DDR5 CL30 DIMM (KIT OF 2) FURY BEAST RGB EXPO (KF560C30BBEAK2-16)

Kuvaus

• PC/palvelin 16 GB DDR5
• 288-pin DIMM 2 x 8 GB
• CAS-viive: 30
• 1.35 V
• ECC
• Taustavalo Punainen/Vihreä/Sininen
• AMD Extended Profiles for Overclocking (EXPO) 1.0

16GB 6000MT/s DDR5 CL30 DIMM (Kit of 2) FURY Beast RGB EXPO

Kingston FURY KF560C30BBEAK2-16 is a kit of two 1G x 64-bit
(8GB) DDR5-6000 CL30 SDRAM (Synchronous DRAM) 1Rx16,
memory module, based on four 1G x 16-bit FBGA components per module. Each module kit supports AMD EXPO v1.1 and
Intel Extreme Memory Profiles (Intel XMP) 3.0. Total kit
capacity is 16GB. Each module has been tested to run at
DDR5-6000 at a low latency timing of 30-36-36 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800
timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold
contact fingers. The JEDEC standard electrical and
mechanical specifications are as follows:

FACTORY TIMING PARAMETERS

• Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V
• EXPO Profile #0: DDR5-6000 CL30-36-36 @1.4V
• EXPO Profile #1: DDR5-5600 CL40-40-40 @1.25V
• XMP Profile #1: DDR5-6000 CL30-36-36 @1.4V
• XMP Profile #2: DDR5-5600 CL40-40-40 @1.25V

FEATURES

• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• Height 1.66” (42.23mm), w/heatsink

Huom! Tekniset tiedot tarjoaa kolmas osapuoli. Data-Systems ei vastaa virheellisistä tiedoista.