ERGOTRON – 200 series dual monitor arm (45-231-200)

Kuvaus

• Enimmäispaino: 11,8 kg
• Näytön yhteensopivuuden enimmäiskoko: 55,9 cm (22")
• Kiinnitystyyppi: Seinä
• Asennusliitännän yhteensopivuus (maks.): 100 x 100 mm
• musta

The interlocking design of the 200 Series provides telescoping adjustment. Easily extend or retract your monitors through a 23" (58 cm) range of motion.

Position two LCDs at the point of need, then push them back out of the way when not in use
Touch-screen stability
Cable management system routes and conceals cables under the arm
Accommodates various display sizes; slide screens into place to align edges
Rugged steel construction
Extends out 23″ (58 cm) or folds back to 5.7″ (14.5 cm) from wall in storage position
Rotate screens to view in either landscape or portrait mode

GTIN: 00698833010589
Part Number: 45-231-200
Product Weight: 4.4 kg
Shipping Weight: 5.4 kg
Shipping Dimensions: 5.25″H x 13.75″W x 24.25″D (133 x 349 x 616 mm)
Description: 200 Series Dual Monitor Wall Mount Arm (black)
Includes wall mount bracket, 2 extensions, crossbar and 2 sliding LCD mounts, fasteners for wood stud or concrete wall, attachment hardware
Fasteners for direct attachment to metal studs are not included. When attaching to wall supported with steel studs, the Steel Stud Wall Mounting Kit (60-591-003) is recommended
Attaches directly to sturdy vertical surfaces. When extra support is needed, order a Wall Plate or Wall Track accessory (Wall Track also requires separately ordered bracket 97-091)
† Maximum outside width of display is 21.25″ (54 cm) when displays are 2″ (5 cm) thick. Actual allowable width of displays will vary slightly depending on display thickness. This width safely accommodates 22″-diagonal screens, as well as many 24″ screens
* Weight Capacity: 13 lbs (5.9 kg) per mount, 26 lbs (11.8 kg) total. Note: Monitors must be equal in weight or ±1 pound (.45 kg)
Install display mounts on the bow at +2.5° or -2.5° angle to optimize viewing conditions
Monitors are installed with 8° inward off-set angle, creating a 16° viewing parabola for better sight lines
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
Durable, easy-to-clean powder-coated painted steel exterior

Huom! Tekniset tiedot tarjoaa kolmas osapuoli. Data-Systems ei vastaa virheellisistä tiedoista.