DELOCK – 3.5″ Mobile Rack for 1 x 2.5″ SATA / SAS HDD / SSD with vibration protection (47228)

Kuvaus

• HDD-häkki
• Yhteensopiva alustatyyppi: Universaali
• Metalli
• 2.5"
• musta

This solid metal mobile rack by Delock can be installed into a free 3.5″ bay of a PC and ensures a 360° vibration protection against horizontal and vertical vibrations throughThe built-in rubber bumpers. A 2.5″ SATA or SAS hard drive can be screwed intoThe frame. For operation with a SAS drive, a SAS controller is required.

• For installation into an available 3.5″ bay
• Connectors: inside: 1 x SATA 6 Gb/s / SAS 12 Gb/s 29 pin receptacle outside: 1 x SATA 6 Gb/s 22 pin plug with locking port
• Suitable for 2.5″ SATA / SAS HDD / SSD: HDD height up to 15 mm supports 5 V HDD / SSD
• Data transfer rate: SATA up to 6 Gb/s SAS up to 12 Gb/s
• With key lock
• Hot Swap
• OS independent, no driver installation necessary

This solid metal mobile rack by Delock can be installed into a free 3.5″ bay of a PC and ensures a 360° vibration protection against horizontal and vertical vibrations throughThe built-in rubber bumpers. A 2.5″ SATA or SAS hard drive can be screwed intoThe frame. For operation with a SAS drive, a SAS controller is required.The mobile rack is equipped with a key lock to prevent unauthorised access.The hot swap function allowsThe exchange ofThe hard disk drive during operation. FurthermoreThe SATA plug onThe outside ofThe device has a locking port, which will ensureThe SATA cables click into place, and are protected against vibrations.The mobile rack can be used whereverThe PC is subject to vibrations. As an additional inner tray forThe fast hard disk changeThe item 47229 by Delock is available. Special features• „360° vibration protection“ against horizontal and vertical vibrations

Huom! Tekniset tiedot tarjoaa kolmas osapuoli. Data-Systems ei vastaa virheellisistä tiedoista.